{"title":"INTAKE MANIFOLDS","description":"","products":[{"product_id":"proflow-billet-cnc-efi-intake-manifold-kit-supermax-plus-for-holden-commodore-ls1-ls2-102mm-bore-black","title":"Proflow Billet CNC LS Intake Manifold Kit, SuperMax Plus, For Holden Commodore LS1\/LS2, 102mm Bore, Gloss Black - PFEMB69000","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEMB69000\u003c\/p\u003e\n\u003cp\u003eProflow is proud to present their new full billet aluminium SuperMax+ LS intake manifold! These low-profile intake manifolds for the popular cathedral port cylinder heads (LS1) have been completely redesigned from their sheet metal counterparts and now comprises of a full CNC-machined 6061-T6 billet aluminium construction. \u003c\/p\u003e\n\u003cp\u003eThey feature tapered runners to increase air velocity entering the cylinder head and their shorter length helps to provide massive top-end power. Power adders such as turbochargers will thrive off the increased plenum volume to provide power from the mid to high RPM range. Billet aluminium fuel rails with AN8 ORB ports are also included which suit short-length 14mm injectors.\u003c\/p\u003e\n\u003cp\u003eThis innovative manifold design has been designed in conjunction with Computational Fluid Dynamics (CFD) software to produce a plenum which aims to evenly distribute airflow to all 8 cylinders. The double hump top design has been shown to tumble and redirect fluid towards the intake ports.\u003c\/p\u003e\n\u003cp\u003eSuperMax+ LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads. It is recommended to be used in conjunction with forced induction packages. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for LS1 styled cathedral port heads\u003c\/li\u003e\n\u003cli\u003eFull billet aluminium anodised construction \u003c\/li\u003e\n\u003cli\u003eRadiused internal runners to promote smooth airflow\u003c\/li\u003e\n\u003cli\u003eSuits 102mm Bore LS throttle body\u003c\/li\u003e\n\u003cli\u003eProvision for GM MAP sensor \u003c\/li\u003e\n\u003cli\u003eIncludes fuel rails, mounting hardware and gaskets \u003c\/li\u003e\n\u003cli\u003eIncludes our 200 Series AN8 stainless steel PTFE hose + Full Flow hose ends\u003c\/li\u003e\n\u003cli\u003e4x vacuum ports located on the rear of the plenum\u003c\/li\u003e\n\u003cli\u003eStainless Steel bolts used throughout including grade 12.9 mounting bolts\u003c\/li\u003e\n\u003cli\u003ePlenum Top sealed with 1 piece CNC machined O ring groove\u003c\/li\u003e\n\u003cli\u003eLifetime structural warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Will fit under most bonnets of Holden Commodores from VT-VF.\u003c\/p\u003e\n\u003cp\u003e**These manifolds are individually inspected before shipping so please allow for an extra day to dispatch**\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865591263540,"sku":"PFEMB69000","price":5214.43,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEMB69000.jpg?v=1774410080"},{"product_id":"proflow-billet-cnc-ls-intake-manifold-kit-supermax-plus-for-holden-commodore-ls3-l92-102mm-bore-gloss-black","title":"Proflow Billet CNC LS Intake Manifold Kit, SuperMax Plus, For Holden Commodore LS3\/L92, 102mm Bore, Gloss Black - PFEMB69001","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEMB69001\u003c\/p\u003e\n\u003cp\u003eProflow is proud to present their new full billet aluminium SuperMax+ LS intake manifold! These low-profile intake manifolds for the popular rectangle port cylinder heads (LS3\/L92) have been completely redesigned from their sheet metal counterparts and now comprises of a full CNC-machined 6061-T6 billet aluminium construction. \u003c\/p\u003e\n\u003cp\u003eThey feature tapered runners to increase air velocity entering the cylinder head and their shorter length helps to provide massive top-end power. Power adders such as turbochargers will thrive off the increased plenum volume to provide power from the mid to high RPM range. Billet aluminium fuel rails with AN8 ORB ports are also included which suit short-length 14mm injectors.\u003c\/p\u003e\n\u003cp\u003eThis innovative manifold design has been designed in conjunction with Computational Fluid Dynamics (CFD) software to produce a plenum which aims to evenly distribute airflow to all 8 cylinders. The double hump top design has been shown to tumble and redirect fluid towards the intake ports.\u003c\/p\u003e\n\u003cp\u003eSuperMax+ LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads. It is recommended to be used in conjunction with forced induction packages. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for LS3\/L92 styled rectangle port heads\u003c\/li\u003e\n\u003cli\u003eFull billet aluminium anodised construction \u003c\/li\u003e\n\u003cli\u003eRadiused internal runners to promote smooth airflow\u003c\/li\u003e\n\u003cli\u003eSuits 102mm Bore LS throttle body\u003c\/li\u003e\n\u003cli\u003eProvision for GM MAP sensor \u003c\/li\u003e\n\u003cli\u003eIncludes fuel rails, mounting hardware and gaskets \u003c\/li\u003e\n\u003cli\u003eIncludes our 200 Series AN8 stainless steel PTFE hose + Full Flow hose ends\u003c\/li\u003e\n\u003cli\u003e4x vacuum ports located on the rear of the plenum\u003c\/li\u003e\n\u003cli\u003eStainless Steel bolts used throughout including grade 12.9 mounting bolts\u003c\/li\u003e\n\u003cli\u003ePlenum Top sealed with 1 piece CNC machined O ring groove\u003c\/li\u003e\n\u003cli\u003eLifetime structural warranty \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Will fit under most bonnets of Holden Commodores from VT-VF.\u003c\/p\u003e\n\u003cp\u003e**These manifolds are individually inspected before shipping so please allow for an extra day to dispatch**\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865591329076,"sku":"PFEMB69001","price":5124.45,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEMB69001_a50f17c1-d062-4e5a-94c7-0a35e3a9b9a5.jpg?v=1774410086"},{"product_id":"proflow-intake-manifold-kit-v2-for-ford-falcon-xr6-ba-bf-fg-barra-fabricated-aluminium-black-80mm-bore","title":"Proflow Intake Manifold Kit V2, For Ford Falcon XR6 BA\/BF\/FG Barra, Fabricated Aluminium, Black, 80mm Bore - PFEM67740BK","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67740BK\u003c\/p\u003e\n\u003cp\u003eProflow’s highly anticipated Series II Barra intake manifold has been completely redesigned for 2023 to provide an ideal solution for anyone looking to build an ultra responsive street\/strip car! Improvements and reiterations have been made all around the board to produce an overall better performing intake manifold.\u003c\/p\u003e\n\u003cp\u003eConsisting of a completely redesigned plenum, they now have provision for an 80 mm throttle body with an improved flange angle for clearance around the thermostat housing. It can be used with both BA\/BF and FG factory fly-by-wire throttle bodies using the supplied adaptors, or it can be used with a universal 80 mm throttle body (sold separately) in an engine swap application.\u003c\/p\u003e\n\u003cp\u003eThis new manifold has been designed in conjunction with Computational Fluid Dynamics (CFD) software which aims to produce a plenum that evenly distributes airflow to all 6 cylinders, ensuring they are as tune-friendly as possible. It now comes with an improved billet fuel rail with additional AN8 ORB ports to make it easier for plumbing, and is also supplied with additional fittings. O-ring grooves have also now been machined into the mounting flange which are used to seal the manifold to the cylinder head (a traditional gasket can still be used however), similar to our other fabricated manifolds such as our 2JZ intake.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStraight runners on all cylinders to promote better AFR's\u003c\/li\u003e\n\u003cli\u003eIncrease flange angled for clearance around thermostat housing\u003c\/li\u003e\n\u003cli\u003eRedesigned plenum chamber for smoother airflow to ensure equal mass flow rate per cylinder for tuneability\u003c\/li\u003e\n\u003cli\u003eValidated using CFD software \u003c\/li\u003e\n\u003cli\u003eRedesigned billet fuel rail with extra ports for simpler plumbing\u003c\/li\u003e\n\u003cli\u003eAdaptors for both BA\/BF and FG fly-by-wire throttle bodies now included\u003c\/li\u003e\n\u003cli\u003eReduced bore size to 80mm (from 90mm) to induce greater air velocity\u003c\/li\u003e\n\u003cli\u003eIntegrated bell mouths for each runner\u003c\/li\u003e\n\u003cli\u003eProvision for standard Ford Falcon MAP sensor\u003c\/li\u003e\n\u003cli\u003e3x 1\/8\" NPT and 1x 1\/4\" NPT vacuum ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eSuits a full length 14 mm o-ring injector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe factory hard-line water piping from the thermostat housing will need to be removed\/modified to install this intake. Thermostat Housing Adaptor # PFETH-825.\u003c\/p\u003e\n\u003cp\u003eWill suit all Ford Falcon BA\/BF\/FG vehicles fitted with the 4.0L Barra engine.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865591820596,"sku":"PFEM67740BK","price":1863.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67740BK_8d2a382d-c33d-42ef-8a60-76b1c926dc04.jpg?v=1774410094"},{"product_id":"proflow-intake-manifold-kit-v2-for-ford-falcon-xr6-ba-bf-fg-barra-fabricated-aluminium-polished-80mm-bore","title":"Proflow Intake Manifold Kit V2, For Ford Falcon XR6 BA\/BF\/FG Barra, Fabricated Aluminium, Polished, 80mm Bore - PFEM67740","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67740\u003c\/p\u003e\n\u003cp\u003eProflow’s highly anticipated Series II Barra intake manifold has been completely redesigned for 2023 to provide an ideal solution for anyone looking to build an ultra responsive street\/strip car! Improvements and reiterations have been made all around the board to produce an overall better performing intake manifold.\u003c\/p\u003e\n\u003cp\u003eConsisting of a completely redesigned plenum, they now have provision for an 80 mm throttle body with an improved flange angle for clearance around the thermostat housing. It can be used with both BA\/BF and FG factory fly-by-wire throttle bodies using the supplied adaptors, or it can be used with a universal 80 mm throttle body (sold separately) in an engine swap application.\u003c\/p\u003e\n\u003cp\u003eThis new manifold has been designed in conjunction with Computational Fluid Dynamics (CFD) software which aims to produce a plenum that evenly distributes airflow to all 6 cylinders, ensuring they are as tune-friendly as possible. It now comes with an improved billet fuel rail with additional AN8 ORB ports to make it easier for plumbing, and is also supplied with additional fittings. O-ring grooves have also now been machined into the mounting flange which are used to seal the manifold to the cylinder head (a traditional gasket can still be used however), similar to our other fabricated manifolds such as our 2JZ intake.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNew features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStraight runners on all cylinders to promote better AFR's\u003c\/li\u003e\n\u003cli\u003eIncrease flange angled for clearance around thermostat housing\u003c\/li\u003e\n\u003cli\u003eRedesigned plenum chamber for smoother airflow to ensure equal mass flow rate per cylinder for tuneability\u003c\/li\u003e\n\u003cli\u003eValidated using CFD software \u003c\/li\u003e\n\u003cli\u003eRedesigned billet fuel rail with extra ports for simpler plumbing\u003c\/li\u003e\n\u003cli\u003eAdaptors for both BA\/BF and FG fly-by-wire throttle bodies now included\u003c\/li\u003e\n\u003cli\u003eReduced bore size to 80mm (from 90mm) to induce greater air velocity\u003c\/li\u003e\n\u003cli\u003eIntegrated bell mouths for each runner\u003c\/li\u003e\n\u003cli\u003eProvision for standard Ford Falcon MAP sensor\u003c\/li\u003e\n\u003cli\u003e3x 1\/8\" NPT and 1x 1\/4\" NPT vacuum ports\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eSuits a full length 14 mm o-ring injector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe factory hard-line water piping from the thermostat housing will need to be removed\/modified to install this intake. Thermostat Housing Adaptor # PFETH-825.\u003c\/p\u003e\n\u003cp\u003eWill suit all Ford Falcon BA\/BF\/FG vehicles fitted with the 4.0L Barra engine.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865591853364,"sku":"PFEM67740","price":1863.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67740_718e55dd-24c5-4f23-99b3-1e76fbe25363.jpg?v=1774410100"},{"product_id":"proflow-intake-manifold-kit-fabricated-aluminium-black-for-toyota-1fz-fe-inlet-plenum-90mm-throttle-body-fuel-rail","title":"Proflow Intake Manifold Kit, Fabricated Aluminium, Black For Toyota 1FZ-FE Inlet Plenum, 90mm Throttle Body, Fuel Rail - PFEM67545BK","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67545BK\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provide excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street or drag car. The 90mm universal throttle body seals with an o-ring and will bolt to any vehicle that was previously running a mechanical throttle body, using the supplied cable bracket. With a heavy duty billet flange, this manifold will perform best with any upgraded turbo packages and other aftermarket bolt ons.This kit comes complete with a 17mm ID fuel rail, fittings and all necessary hardware for mounting. Suits a full length 14mm o-ring injector. Some modifications may be required for fitment.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865591886132,"sku":"PFEM67545BK","price":17943.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67545BK_3c7ff4ca-e6f6-4eec-8b94-b22cc0cebdb7.jpg?v=1774410106"},{"product_id":"proflow-intake-manifold-kit-fabricated-aluminium-black-for-nissan-rb26-inlet-plenum-90mm-throttle-body-fuel-rail","title":"Proflow Intake Manifold Kit, Fabricated Aluminium, Black, For Nissan RB26 Inlet Plenum, 90mm Throttle Body, Fuel Rail - PFEM67526BK","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67526BK\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provides excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street car. These kits come complete with 90mm Throttle Body's and Aluminium Fuel Rails. Available in black or polished versions.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865591984436,"sku":"PFEM67526BK","price":1743.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67526BK_8d0dd710-dd3b-43ff-9085-fa2e258f382f.jpg?v=1774410108"},{"product_id":"proflow-intake-manifold-kit-fabricated-aluminium-black-for-nissan-tb48-inlet-plenum-90mm-throttle-body-fuel-rail","title":"Proflow Intake Manifold Kit, Fabricated Aluminium, Black, For Nissan TB48 Inlet Plenum, 90mm Throttle Body, Fuel Rail - PFEM67535BK","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67535BK\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provides excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street car. These kits come complete with 90mm Throttle Body's and Aluminium Fuel Rails. Available in black or polished versions.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865592148276,"sku":"PFEM67535BK","price":1791.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67535BK.jpg?v=1774410111"},{"product_id":"proflow-intake-manifold-kit-fabricated-aluminium-black-for-nissan-commodore-rb30-inlet-plenum-90mm-throttle-body-fuel-rail-kit","title":"Proflow Intake Manifold Kit, Fabricated Aluminium, Black, For Nissan, Commodore RB30, Inlet Plenum, 90mm Throttle Body, Fuel Rail Kit - PFEM67530BK","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67530BK\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provide excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street or drag car. Featuring a 90mm throttle body, it seals with an o-ring and will bolt to any vehicle that was running a mechanical throttle body previously, using the supplied cable bracket. With a heavy duty billet flange, this manifold will perform best with any upgraded turbo packages and other aftermarket bolt ons.This kit comes complete with a 17mm ID fuel rail, fittings and all necessary hardware for mounting. Suits a full length 14mm O-ring injector. Does not suit factory style VL commodore injector. Some modifications may be required for fitment.\u003c\/p\u003e\n\u003cp\u003eSuits the following vehicles with RB30 engines:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline R31 Holden VL Commodore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe top radiator hose will have have to be modified to clear the throttle body.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865592279348,"sku":"PFEM67530BK","price":1843.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67530BK_c49c48da-4fa5-4237-85de-d6342527e887.jpg?v=1774410116"},{"product_id":"proflow-intake-manifold-kit-fabricated-aluminium-for-toyota-2jzgte-turbo-polished-inlet-plenum-90mm-throttle-body-fuel-rail-kit","title":"Proflow Intake Manifold Kit, Fabricated Aluminium, For Toyota 2JZGTE Turbo, Polished, Inlet Plenum, 90mm Throttle Body, Fuel Rail Kit - PFEM67552","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67552\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provide excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street or drag car. The 90mm universal throttle body seals with an o-ring and will bolt to any vehicle that was running a mechanical throttle body beforehand, using the supplied cable bracket. With a heavy duty billet flange, this manifold will perform best with any upgraded turbo packages and other aftermarket bolt ons. This kit comes complete with a 17mm ID fuel rail, fittings and all necessary hardware for mounting. Some modifications may be required for fitment. \u003c\/p\u003e\n\u003cp\u003eSpecifications:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuits VVTi and non-VVTi Turbo Heads only\u003c\/li\u003e\n\u003cli\u003eDesigned for equal flow between all runners \/ equal length runners\u003c\/li\u003e\n\u003cli\u003eUses factory IAC valve\u003c\/li\u003e\n\u003cli\u003eWill support in excess of 1000 HP with appropriate suppoting mods\u003c\/li\u003e\n\u003cli\u003eCNC-machined billet aluminium base flange \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865592574260,"sku":"PFEM67552","price":1793.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67552.jpg?v=1774410120"},{"product_id":"proflow-intake-manifold-kit-fabricated-aluminium-polished-for-toyota-1fz-fe-inlet-plenum-90mm-throttle-body-fuel-rail","title":"Proflow Intake Manifold Kit, Fabricated Aluminium, Polished For Toyota 1FZ-FE Inlet Plenum, 90mm Throttle Body, Fuel Rail - PFEM67545","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67545\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provide excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street or drag car. The 90mm universal throttle body seals with an o-ring and will bolt to any vehicle that was previously running a mechanical throttle body, using the supplied cable bracket. With a heavy duty billet flange, this manifold will perform best with any upgraded turbo packages and other aftermarket bolt ons.This kit comes complete with a 17mm ID fuel rail, fittings and all necessary hardware for mounting. Suits a full length 14mm o-ring injector. Some modifications may be required for fitment.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865592607028,"sku":"PFEM67545","price":1753.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67545.jpg?v=1774410121"},{"product_id":"proflow-intake-manifold-kit-fabricated-aluminium-polished-for-nissan-rb26-inlet-plenum-90mm-throttle-body-fuel-rail","title":"Proflow Intake Manifold Kit, Fabricated Aluminium, Polished, For Nissan RB26 Inlet Plenum, 90mm Throttle Body, Fuel Rail - PFEM67526","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67526\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provides excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street car. These kits come complete with 90mm Throttle Body's and Aluminium Fuel Rails. Available in black or polished versions.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865592639796,"sku":"PFEM67526","price":1753.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67526.jpg?v=1774410124"},{"product_id":"proflow-intake-manifold-kit-fabricated-aluminium-polished-for-nissan-tb48-inlet-plenum-90mm-throttle-body-fuel-rail-polished","title":"Proflow Intake Manifold Kit, Fabricated Aluminium, Polished, For Nissan TB48 Inlet Plenum, 90mm Throttle Body, Fuel Rail Polished - PFEM67535","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67535\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provides excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street car. These kits come complete with 90mm Throttle Body's and Aluminium Fuel Rails. Available in black or polished versions.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865592672564,"sku":"PFEM67535","price":1753.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67535_7d29f525-45e5-4c73-81a7-2730a045a218.jpg?v=1774410126"},{"product_id":"proflow-intake-manifold-kit-fabricated-aluminium-polished-for-nissan-commodore-rb30-inlet-plenum-90mm-throttle-body-fuel-rail-kit","title":"Proflow Intake Manifold Kit, Fabricated Aluminium, Polished, For Nissan, Commodore RB30, Inlet Plenum, 90mm Throttle Body, Fuel Rail Kit - PFEM67530","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67530\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provide excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street or drag car. Featuring a 90mm throttle body, it seals with an o-ring and will bolt to any vehicle that was running a mechanical throttle body previously, using the supplied cable bracket. With a heavy duty billet flange, this manifold will perform best with any upgraded turbo packages and other aftermarket bolt ons.This kit comes complete with a 17mm ID fuel rail, fittings and all necessary hardware for mounting. Suits a full length 14mm O-ring injector. Does not suit factory style VL commodore injector. Some modifications may be required for fitment.\u003c\/p\u003e\n\u003cp\u003eSuits the following vehicles with RB30 engines:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNissan Skyline R31 Holden VL Commodore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThe top radiator hose will have have to be modified to clear the throttle body.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865592738100,"sku":"PFEM67530","price":1813.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67530.jpg?v=1774410129"},{"product_id":"proflow-intake-manifold-kit-for-nissan-sr20-s13-fabricated-aluminium-black-76mm-throttle-body-fuel-rail-kit-pfem67522bk","title":"Proflow Intake Manifold Kit, For Nissan SR20 S13, Fabricated Aluminium, Black, 76mm Throttle Body, Fuel Rail Kit - PFEM67522BK","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67522BK\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provide excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street or drag car. This intake features a 76mm throttle body seals that seals with an o-ring and will bolt to any vehicle that was running a mechanical throttle body beforehand, using the supplied cable bracket. With a heavy duty billet flange, this manifold will perform best with any upgraded turbo packages and other aftermarket bolt ons. This kit comes complete with a 17mm ID fuel rail, fittings and all necessary hardware for mounting. It also includes a radiator hose and water-neck relocation kit which allows the remote mounting of the water neck to clear the manifold body. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Suits a short length 14mm injector.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865592869172,"sku":"PFEM67522BK","price":1619.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67522BK_e5ac80b2-b98a-4cc3-8889-cde2aabe0a4a.jpg?v=1774410131"},{"product_id":"proflow-intake-manifold-kit-for-nissan-sr20-s13-fabricated-aluminium-polished-76mm-throttle-body-fuel-rail-kit-pfem67522","title":"Proflow Intake Manifold Kit, For Nissan SR20 S13, Fabricated Aluminium, Polished, 76mm Throttle Body, Fuel Rail Kit - PFEM67522","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67522\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated aluminium intake manifold kits provide excellent mid range torque whilst dramatically improving top end power and is ideal for anyone looking to build an ultra responsive street or drag car. This intake features a 76mm throttle body seals that seals with an o-ring and will bolt to any vehicle that was running a mechanical throttle body beforehand, using the supplied cable bracket. With a heavy duty billet flange, this manifold will perform best with any upgraded turbo packages and other aftermarket bolt ons. This kit comes complete with a 17mm ID fuel rail, fittings and all necessary hardware for mounting. It also includes a radiator hose and water-neck relocation kit which allows the remote mounting of the water neck to clear the manifold body. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Suits a short length 14mm injector.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865593131316,"sku":"PFEM67522","price":1619.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67522_ac0ba7ab-b62e-40c7-a2ef-252e05b251aa.jpg?v=1774410136"},{"product_id":"proflow-intake-manifold-kit-supermax-plus-cast-aluminium-efi-for-holden-commodore-ls1-ls2-102mm-bore-natural-pfem68711","title":"Proflow Intake Manifold Kit, SuperMax Plus, Cast Aluminium EFI, For Holden Commodore LS1\/LS2, 102mm Bore, Natural - PFEM68711","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM68711\u003c\/p\u003e\n\u003cp\u003eProflow’s new cast aluminum SuperMax+ Intake Manifolds are purpose-built for high-performance, forced-induction applications utilising a 102mm throttle body. Featuring a low-profile, 3-piece design inspired by our full CNC billet version, these manifolds deliver exceptional airflow for maximum top-end power.\u003c\/p\u003e\n\u003cp\u003eWith short runners and an increased plenum volume optimised through advanced Computational Fluid Dynamics (CFD), they excel in mid-to-high RPM ranges, making them ideal for turbocharged setups. Each manifold includes high-volume billet fuel rail kits equipped with AN8 ORB ports for seamless fuel delivery and 1\/8\" NPT nitrous ports tapped into each runner!\u003c\/p\u003e\n\u003cp\u003eAvailable in both cathedral port (LS1) and rectangle port (LS2\/LS3) configurations to suit your specific engine platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for both rectangle\/cathedral port heads\u003c\/li\u003e\n\u003cli\u003eRadiused internal runners to promote smooth airflow\u003c\/li\u003e\n\u003cli\u003eSuits 102mm Bore LS throttle body\u003c\/li\u003e\n\u003cli\u003eProvision for GM LS2\/LS3 MAP sensor \u003c\/li\u003e\n\u003cli\u003eIncludes billet fuel rails, mounting hardware and gaskets \u003c\/li\u003e\n\u003cli\u003e4x vacuum ports located on the rear of the plenum\u003c\/li\u003e\n\u003cli\u003eStainless Steel bolts used throughout including grade 12.9 mounting bolts\u003c\/li\u003e\n\u003cli\u003eRunner assemblies sealed with CNC machined O-ring grooves\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT ports tapped into each runner for nitrous\u003c\/li\u003e\n\u003cli\u003eSuits a short length (compact) 14mm o-ring injector\u003c\/li\u003e\n\u003cli\u003eWill fit under most bonnets of Holden Commodores from VT-VF (170mm overall height).\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Clearancing will be required when using this intake with factory heads that have a raised shoulder along top above intake ports \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865593524532,"sku":"PFEM68711","price":1719.51,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM68711_4585f539-0525-4f02-a179-22c6eddd7faf.jpg?v=1774410141"},{"product_id":"proflow-intake-manifold-kit-supermax-plus-cast-aluminium-efi-for-holden-commodore-ls1-ls2-102mm-bore-black-pfem68711-bk","title":"Proflow Intake Manifold Kit, SuperMax Plus, Cast Aluminium, EFI, For Holden Commodore LS1\/LS2, 102mm Bore, Black - PFEM68711-BK","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM68711-BK\u003c\/p\u003e\n\u003cp\u003eProflow’s new cast aluminum SuperMax+ Intake Manifolds are purpose-built for high-performance, forced-induction applications utilising a 102mm throttle body. Featuring a low-profile, 3-piece design inspired by our full CNC billet version, these manifolds deliver exceptional airflow for maximum top-end power.\u003c\/p\u003e\n\u003cp\u003eWith short runners and an increased plenum volume optimised through advanced Computational Fluid Dynamics (CFD), they excel in mid-to-high RPM ranges, making them ideal for turbocharged setups. Each manifold includes high-volume billet fuel rail kits equipped with AN8 ORB ports for seamless fuel delivery and 1\/8\" NPT nitrous ports tapped into each runner!\u003c\/p\u003e\n\u003cp\u003eAvailable in both cathedral port (LS1) and rectangle port (LS2\/LS3) configurations to suit your specific engine platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for both rectangle\/cathedral port heads\u003c\/li\u003e\n\u003cli\u003eRadiused internal runners to promote smooth airflow\u003c\/li\u003e\n\u003cli\u003eSuits 102mm Bore LS throttle body\u003c\/li\u003e\n\u003cli\u003eProvision for GM LS2\/LS3 MAP sensor \u003c\/li\u003e\n\u003cli\u003eIncludes billet fuel rails, mounting hardware and gaskets \u003c\/li\u003e\n\u003cli\u003e4x vacuum ports located on the rear of the plenum\u003c\/li\u003e\n\u003cli\u003eStainless Steel bolts used throughout including grade 12.9 mounting bolts\u003c\/li\u003e\n\u003cli\u003eRunner assemblies sealed with CNC machined O-ring grooves\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT ports tapped into each runner for nitrous\u003c\/li\u003e\n\u003cli\u003eSuits a short length (compact) 14mm o-ring injector\u003c\/li\u003e\n\u003cli\u003eWill fit under most bonnets of Holden Commodores from VT-VF (170mm overall height).\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Clearancing will be required when using this intake with factory heads that have a raised shoulder along top above intake ports \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865593557300,"sku":"PFEM68711-BK","price":1719.51,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM68711-BK.jpg?v=1774410148"},{"product_id":"proflow-intake-manifold-kit-supermax-plus-cast-aluminium-efi-for-holden-commodore-ls3-l92-102mm-bore-black-pfem68713-bk","title":"Proflow Intake Manifold Kit, SuperMax Plus, Cast Aluminium, EFI, For Holden Commodore LS3\/L92, 102mm Bore, Black - PFEM68713-BK","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM68713-BK\u003c\/p\u003e\n\u003cp\u003eProflow’s new cast aluminum SuperMax+ Intake Manifolds are purpose-built for high-performance, forced-induction applications utilising a 102mm throttle body. Featuring a low-profile, 3-piece design inspired by our full CNC billet version, these manifolds deliver exceptional airflow for maximum top-end power.\u003c\/p\u003e\n\u003cp\u003eWith short runners and an increased plenum volume optimised through advanced Computational Fluid Dynamics (CFD), they excel in mid-to-high RPM ranges, making them ideal for turbocharged setups. Each manifold includes high-volume billet fuel rail kits equipped with AN8 ORB ports for seamless fuel delivery and 1\/8\" NPT nitrous ports tapped into each runner!\u003c\/p\u003e\n\u003cp\u003eAvailable in both cathedral port (LS1) and rectangle port (LS2\/LS3) configurations to suit your specific engine platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for both rectangle\/cathedral port heads\u003c\/li\u003e\n\u003cli\u003eRadiused internal runners to promote smooth airflow\u003c\/li\u003e\n\u003cli\u003eSuits 102mm Bore LS throttle body\u003c\/li\u003e\n\u003cli\u003eProvision for GM LS2\/LS3 MAP sensor \u003c\/li\u003e\n\u003cli\u003eIncludes billet fuel rails, mounting hardware and gaskets \u003c\/li\u003e\n\u003cli\u003e4x vacuum ports located on the rear of the plenum\u003c\/li\u003e\n\u003cli\u003eStainless Steel bolts used throughout including grade 12.9 mounting bolts\u003c\/li\u003e\n\u003cli\u003eRunner assemblies sealed with CNC machined O-ring grooves\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT ports tapped into each runner for nitrous\u003c\/li\u003e\n\u003cli\u003eSuits a short length (compact) 14mm o-ring injector\u003c\/li\u003e\n\u003cli\u003eWill fit under most bonnets of Holden Commodores from VT-VF (170mm overall height).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Clearancing will be required when using this intake with factory heads that have a raised shoulder along top above intake ports \u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865593590068,"sku":"PFEM68713-BK","price":1719.51,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM68713-BK_6f3ef6f0-b30b-4ae5-8b0a-7bae2338e2a5.jpg?v=1774410155"},{"product_id":"proflow-intake-manifold-kit-supermax-plus-cast-aluminium-efi-for-holden-commodore-ls3-l92-102mm-bore-natural-pfem68713","title":"Proflow Intake Manifold Kit, SuperMax Plus, Cast Aluminium, EFI, For Holden Commodore LS3\/L92, 102mm Bore, Natural - PFEM68713","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM68713\u003c\/p\u003e\n\u003cp\u003eProflow’s new cast aluminum SuperMax+ Intake Manifolds are purpose-built for high-performance, forced-induction applications utilising a 102mm throttle body. Featuring a low-profile, 3-piece design inspired by our full CNC billet version, these manifolds deliver exceptional airflow for maximum top-end power.\u003c\/p\u003e\n\u003cp\u003eWith short runners and an increased plenum volume optimised through advanced Computational Fluid Dynamics (CFD), they excel in mid-to-high RPM ranges, making them ideal for turbocharged setups. Each manifold includes high-volume billet fuel rail kits equipped with AN8 ORB ports for seamless fuel delivery and 1\/8\" NPT nitrous ports tapped into each runner!\u003c\/p\u003e\n\u003cp\u003eAvailable in both cathedral port (LS1) and rectangle port (LS2\/LS3) configurations to suit your specific engine platform.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for both rectangle\/cathedral port heads\u003c\/li\u003e\n\u003cli\u003eRadiused internal runners to promote smooth airflow\u003c\/li\u003e\n\u003cli\u003eSuits 102mm Bore LS throttle body\u003c\/li\u003e\n\u003cli\u003eProvision for GM LS2\/LS3 MAP sensor \u003c\/li\u003e\n\u003cli\u003eIncludes billet fuel rails, mounting hardware and gaskets \u003c\/li\u003e\n\u003cli\u003e4x vacuum ports located on the rear of the plenum\u003c\/li\u003e\n\u003cli\u003eStainless Steel bolts used throughout including grade 12.9 mounting bolts\u003c\/li\u003e\n\u003cli\u003eRunner assemblies sealed with CNC machined O-ring grooves\u003c\/li\u003e\n\u003cli\u003e1\/8\" NPT ports tapped into each runner for nitrous\u003c\/li\u003e\n\u003cli\u003eSuits a short length (compact) 14mm o-ring injector\u003c\/li\u003e\n\u003cli\u003eWill fit under most bonnets of Holden Commodores from VT-VF (170mm overall height).\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Clearancing will be required when using this intake with factory heads that have a raised shoulder along top above intake ports \u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865593622836,"sku":"PFEM68713","price":1719.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM68713.jpg?v=1774410161"},{"product_id":"proflow-intake-manifold-supermax-hi-ram-black-aluminium-chev-holden-commodore-ls3-l92-with-fuel-rails-kit-pfem300116-bk","title":"Proflow Intake Manifold, Supermax Hi Ram, Cast Aluminium,  Holden Commodore LS3\/L92, with Fuel Rails, Kit, Black - PFEM300116-BK","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM300116-BK\u003c\/p\u003e\n\u003cp\u003eProflows LS3\/L92  Hi-Ram Intake Manifold is introduced as a cost effective alternative to fabricated sheet-metal for high-performance applications where induction system height is not limited. Coupling this Hi-Ram intake with the high flowing LS3\/L92 style cylinder heads has outstanding potential for N\/A and forced induction applications at a budget-minded cost. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! • The base is designed to be modular in configuration to accept a wide range of carbureted and EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. • Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations • EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. • Cast aluminum construction. • Intended for use on naturally aspirated or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBase Plenum Top Mounting Flange Height – 8.42” to the lifter valley cover flange on engine block.\u003c\/li\u003e\n\u003cli\u003eTotal Height with 92\/102mm EFI Plenum Top – 12.32” to the lifter valley cover flange on engine block.\u003c\/li\u003e\n\u003cli\u003ePort Size – 2.49” Height x 1.21” Wide\u003c\/li\u003e\n\u003cli\u003eMounting Flange Gasket Type – Standard LS3 Molded O-Ring\u003c\/li\u003e\n\u003cli\u003ePlenum Top Gasket Type – 3\/32” Round O-ring Cord\u003c\/li\u003e\n\u003cli\u003eThrottle Body Flange Location, with 92\/102mm EFI Plenum Top : Height – 8.42” (from engine block lifter valley cover flange), Longitudinal Location – 3.84” (forward from engine block front flange), Angle – 25 deg. (down from vertical)\u003c\/li\u003e\n\u003cli\u003eRunner Length – 6.50”, As-Cast Runner Cross-Sectional Area – Tapered 4.25 in² to 2.77 in²\u003c\/li\u003e\n\u003cli\u003eIntended for use on naturally aspirated or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865593721140,"sku":"PFEM300116-BK","price":1915.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM300116-BK_8638f9cb-8159-4e76-9bc5-e46f040bec6a.jpg?v=1774410169"},{"product_id":"proflow-intake-manifold-supermax-hi-ram-aluminium-chev-holden-commodore-ls3-l92-with-fuel-rails-kit-pfem300116","title":"Proflow Intake Manifold, Supermax Hi Ram, Cast Aluminium,  Holden Commodore LS3\/L92, with Fuel Rails, Kit, Natural - PFEM300116","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM300116\u003c\/p\u003e\n\u003cp\u003eProflows LS3\/L92  Hi-Ram Intake Manifold is introduced as a cost effective alternative to fabricated sheet-metal for high-performance applications where induction system height is not limited. Coupling this Hi-Ram intake with the high flowing LS3\/L92 style cylinder heads has outstanding potential for N\/A and forced induction applications at a budget-minded cost. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! • The base is designed to be modular in configuration to accept a wide range of carbureted and EFI tops and to be attractive to builders and fabricators as the foundation for custom induction systems. • Runner length and the tapered cross-section designed to perform well for a wide range of engine configurations • EFI fuel rails are machined for -8AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system and come standard with EFI Hi-Ram kits. • Cast aluminum construction. • Intended for use on naturally aspirated or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBase Plenum Top Mounting Flange Height – 8.42” to the lifter valley cover flange on engine block.\u003c\/li\u003e\n\u003cli\u003eTotal Height with 92\/102mm EFI Plenum Top – 12.32” to the lifter valley cover flange on engine block.\u003c\/li\u003e\n\u003cli\u003ePort Size – 2.49” Height x 1.21” Wide\u003c\/li\u003e\n\u003cli\u003eMounting Flange Gasket Type – Standard LS3 Molded O-Ring\u003c\/li\u003e\n\u003cli\u003ePlenum Top Gasket Type – 3\/32” Round O-ring Cord\u003c\/li\u003e\n\u003cli\u003eThrottle Body Flange Location, with 92\/102mm EFI Plenum Top : Height – 8.42” (from engine block lifter valley cover flange), Longitudinal Location – 3.84” (forward from engine block front flange), Angle – 25 deg. (down from vertical)\u003c\/li\u003e\n\u003cli\u003eRunner Length – 6.50”, As-Cast Runner Cross-Sectional Area – Tapered 4.25 in² to 2.77 in²\u003c\/li\u003e\n\u003cli\u003eIntended for use on naturally aspirated or forced induction engines in the 6.0 to 7.0+ liter range, max power at 7000-8000+RPM\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865593819444,"sku":"PFEM300116","price":1915.11,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM300116.jpg?v=1774410177"},{"product_id":"proflow-supermax-efi-intake-manifold-kit-for-holden-commodore-ls1-ls2-fabricated-black-w-fuel-rails-102mm-bore","title":"Proflow SuperMax EFI Intake Manifold Kit, For Holden Commodore LS1\/LS2, Fabricated Black, w\/Fuel Rails, 102mm Bore - PFEM63232","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM63232\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS2\/LS3 map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have both 4500 and 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865594212660,"sku":"PFEM63232","price":1305.82,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM63232.jpg?v=1774410184"},{"product_id":"proflow-supermax-efi-intake-manifold-kit-for-holden-commodore-ls3-l92-fabricated-black-w-fuel-rails-102mm-bore","title":"Proflow SuperMax EFI Intake Manifold Kit, For Holden Commodore LS3\/L92, Fabricated Black, w\/Fuel Rails, 102mm Bore - PFEM63242","description":"All ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM63242\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS2\/LS3 map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\r  \u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\r  \u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have both 4500 and 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865594769716,"sku":"PFEM63242","price":1301.12,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM63242.jpg?v=1774410188"},{"product_id":"proflow-supermax-efi-intake-manifold-kit-low-profile-for-holden-commodore-ls1-ls2-fabricated-black-w-fuel-rails-102mm-bore","title":"Proflow SuperMax EFI Intake Manifold Kit, Low Profile, For Holden Commodore LS1\/LS2, Fabricated Black, w\/Fuel Rails, 102mm Bore - PFEM67122","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67122\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS2\/LS3 map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have both 4500 and 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\n\u003cp\u003eSuits a compact length 14mm injector.\u003c\/p\u003e\n\u003cp\u003eNote: The low profile versions will fit under most bonnets of Holden Commodores from VT-VF.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865594802484,"sku":"PFEM67122","price":1134.38,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67122.jpg?v=1774410192"},{"product_id":"proflow-supermax-efi-intake-manifold-kit-low-profile-for-holden-commodore-ls1-ls2-fabricated-black-w-fuel-rails-92mm-bore","title":"Proflow SuperMax EFI Intake Manifold Kit, Low Profile, For Holden Commodore LS1\/LS2, Fabricated Black, w\/Fuel Rails, 92mm Bore - PFEM67121","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67121\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS2\/LS3 map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have both 4500 and 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\n\u003cp\u003eSuits a compact length 14mm injector.\u003c\/p\u003e\n\u003cp\u003eNote: The low profile versions will fit under most bonnets of Holden Commodores from VT-VF.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865594835252,"sku":"PFEM67121","price":1134.32,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67121_572cc189-def2-4281-a36b-3a4995924f59.jpg?v=1774410197"},{"product_id":"proflow-supermax-efi-intake-manifold-kit-low-profile-for-holden-commodore-ls3-l92-fabricated-black-w-fuel-rails-102mm-bore","title":"Proflow SuperMax EFI Intake Manifold Kit, Low Profile, For Holden Commodore LS3\/L92, Fabricated Black, w\/Fuel Rails, 102mm Bore - PFEM67322","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67322\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have both 4500 and 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\n\u003cp\u003eSuits a compact length 14mm injector.\u003c\/p\u003e\n\u003cp\u003eNote: The low profile versions will fit under most bonnets of Holden Commodores from VT-VF.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865594868020,"sku":"PFEM67322","price":1213.21,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67322_8fcab45b-3767-4180-acbc-0a28175709c8.jpg?v=1774410202"},{"product_id":"proflow-supermax-efi-intake-manifold-kit-low-profile-for-holden-commodore-ls3-l92-fabricated-black-w-fuel-rails-92mm-bore","title":"Proflow SuperMax EFI Intake Manifold Kit, Low Profile, For Holden Commodore LS3\/L92, Fabricated Black, w\/Fuel Rails, 92mm Bore - PFEM67321","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM67321\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have both 4500 and 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\n\u003cp\u003eSuits a compact length 14mm injector.\u003c\/p\u003e\n\u003cp\u003eNote: The low profile versions will fit under most bonnets of Holden Commodores from VT-VF.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865594900788,"sku":"PFEM67321","price":1213.63,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM67321_c9909f65-6c2b-496a-98cd-017710a550cb.jpg?v=1774410208"},{"product_id":"proflow-supermax-efi-intake-manifold-with-fuel-rails-tunnel-ram-fabricated-black-quad-4150-efi-throttle-body-sb-ford-289-302w-each","title":"Proflow SuperMax EFI Intake Manifold w\/Fuel Rails, Suit SB Ford 289-302W, Tunnel Ram, Fabricated Black, Dual 4150 Throttle Bodies - PFEM64243","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM64243\u003c\/p\u003e\n\u003cp\u003eWe have released a range of fabricated aluminium manifolds to suit both small-block Ford and Chevrolet engine platforms. They have dual 4150 bolt pattern flanges welded to them which pair well with our EFI quad throttle bodies or an aftermarket carburetted system. They are powder coated black for a great looking finish.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3mm thick T6061 Sheet Aluminum construction, more durable than competitive intakes\u003c\/li\u003e\n\u003cli\u003eFits 8.2 deck blocks\u003c\/li\u003e\n\u003cli\u003e100% TIG welded\u003c\/li\u003e\n\u003cli\u003eWith Billet Fuel Rails\u003c\/li\u003e\n\u003cli\u003eAvailable for EFI and Carbureted applications \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865595031860,"sku":"PFEM64243","price":1518.34,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM64243_3d003cfc-4b9f-4ff5-98de-3ab699f11720.jpg?v=1774410213"},{"product_id":"proflow-supermax-efi-intake-manifold-with-fuel-rails-fabricated-black-102mm-throttle-body-for-ford-mustang-5-0l-coyote-each","title":"Proflow SuperMax EFI Intake Manifold With Fuel Rails, Fabricated, Black, 102mm Throttle Body, For Ford Mustang, 5.0L Coyote, Each - PFEM64293","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM64293\u003c\/p\u003e\n\u003cp\u003eProflow's fabricated EFI intake manifolds for  Ford 5.0L Coyote engines. These performance sheet metal intakes are great looking and an excellent value compared to other fabricated intake manifolds.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3mm thick T6061 Sheet Aluminum construction, more durable than competitive intakes\u003c\/li\u003e\n\u003cli\u003eFits Ford Coyote 2011-2023\u003c\/li\u003e\n\u003cli\u003e100% TIG welded\u003c\/li\u003e\n\u003cli\u003eWith Billet Fuel Rails\u003c\/li\u003e\n\u003cli\u003eFront Height: 8.500 in.\u003c\/li\u003e\n\u003cli\u003eRear Height: 8.250 in.\u003c\/li\u003e\n\u003cli\u003eIntake Flange: 0.445 in. Thick\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865595326772,"sku":"PFEM64293","price":1359.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM64293_2cf851b4-c878-49ed-98d2-0018a55483c9.jpg?v=1774410218"},{"product_id":"proflow-supermax-intake-manifold-kit-tunnel-ram-for-holden-commodore-ls1-ls2-efi-4150-fabricated-black-kir","title":"Proflow SuperMax Intake Manifold Kit, Tunnel Ram, For Holden Commodore LS1\/LS2, EFI 4150, Fabricated Black, kir - PFEM63238-KIT","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM63238-KIT\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Fabricated Intake Manifold\u003c\/li\u003e\n\u003cli\u003e2x Quad Throttle Bodies\u003c\/li\u003e\n\u003cli\u003e2x Air filters 9\" x 4\" Black\u003c\/li\u003e\n\u003cli\u003e2x Air Filter Spacer Kit\u003c\/li\u003e\n\u003cli\u003e1x Throttle Body Linkage Kit\u003c\/li\u003e\n\u003cli\u003e2x Mounting Stud Kits\u003c\/li\u003e\n\u003cli\u003e2x Base Gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3mm thick T6061 Sheet Aluminum construction, more durable than competitive intakes\u003c\/li\u003e\n\u003cli\u003eEFI Versions are Available in 92mm and 102mm bore Throttle Body \u003c\/li\u003e\n\u003cli\u003e100% TIG welded\u003c\/li\u003e\n\u003cli\u003eAvailable for EFI and Carbureted applications with custom Holley Sniper logo\u003c\/li\u003e\n\u003cli\u003eCarby or EFI Versions with include 3\/8\" Billet Fuel rail kits \u003c\/li\u003e\n\u003cli\u003eRunner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865595523380,"sku":"PFEM63238-KIT","price":3619.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM63238-KIT_53bb9f29-4f87-4444-b445-13899e5b5e62.jpg?v=1774410221"},{"product_id":"proflow-supermax-intake-manifold-kit-tunnel-ram-for-holden-commodore-ls1-ls2-efi-4150-fabricated-silver-kit","title":"Proflow SuperMax Intake Manifold Kit, Tunnel Ram, For Holden Commodore LS1\/LS2, EFI 4150, Fabricated Silver, kit - PFEM63238-KIT-S","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM63238-KIT-S\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Fabricated Intake Manifold\u003c\/li\u003e\n\u003cli\u003e2x Quad Throttle Bodies\u003c\/li\u003e\n\u003cli\u003e2x Air filters 9\" x 4\" Silver\u003c\/li\u003e\n\u003cli\u003e2x Air Filter Spacer Kit\u003c\/li\u003e\n\u003cli\u003e1x Throttle Body Linkage Kit\u003c\/li\u003e\n\u003cli\u003e2x Mounting Stud Kits\u003c\/li\u003e\n\u003cli\u003e2x Base Gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3mm thick T6061 Sheet Aluminum construction, more durable than competitive intakes\u003c\/li\u003e\n\u003cli\u003eEFI Versions are Available in 92mm and 102mm bore Throttle Body \u003c\/li\u003e\n\u003cli\u003e100% TIG welded\u003c\/li\u003e\n\u003cli\u003eAvailable for EFI and Carbureted applications\u003c\/li\u003e\n\u003cli\u003eCarby or EFI Versions with include 3\/8\" Billet Fuel rail kits \u003c\/li\u003e\n\u003cli\u003eRunner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865595556148,"sku":"PFEM63238-KIT-S","price":3619.98,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM63238-KIT-S_ff6a74b7-4155-4059-9c11-dee446849ee8.jpg?v=1774410227"},{"product_id":"proflow-supermax-intake-manifold-kit-tunnel-ram-for-holden-commodore-ls3-l92-efi-4150-fabricated-black-kit","title":"Proflow SuperMax Intake Manifold Kit, Tunnel Ram, For Holden Commodore LS3\/L92, EFI 4150, Fabricated Black, Kit - PFEM63248-KIT","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM63248-KIT\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Fabricated Intake Manifold\u003c\/li\u003e\n\u003cli\u003e2x Quad Throttle Bodies\u003c\/li\u003e\n\u003cli\u003e2x Air filters 9\"x4\"\u003c\/li\u003e\n\u003cli\u003e2x Air Filter Spacer Kit\u003c\/li\u003e\n\u003cli\u003e1x Throttle Body Linkage Kit\u003c\/li\u003e\n\u003cli\u003e2x Mounting Stud Kits\u003c\/li\u003e\n\u003cli\u003e2x Base Gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3mm thick T6061 Sheet Aluminum construction, more durable than competitive intakes\u003c\/li\u003e\n\u003cli\u003eEFI Versions are Available in 92mm and 102mm bore Throttle Body \u003c\/li\u003e\n\u003cli\u003e100% TIG welded\u003c\/li\u003e\n\u003cli\u003eAvailable for EFI and Carbureted applications with custom Holley Sniper logo\u003c\/li\u003e\n\u003cli\u003eCarby or EFI Versions with include 3\/8\" Billet Fuel rail kits \u003c\/li\u003e\n\u003cli\u003eRunner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865595588916,"sku":"PFEM63248-KIT","price":3619.34,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM63248-KIT_a5bd7d0f-55e6-4942-926f-e79f87a09431.jpg?v=1774410233"},{"product_id":"proflow-supermax-intake-manifold-kit-tunnel-ram-for-holden-commodore-ls3-l92-efi-4150-fabricated-silver-kit","title":"Proflow SuperMax Intake Manifold Kit, Tunnel Ram, For Holden Commodore LS3\/L92, EFI 4150, Fabricated Silver, Kit - PFEM63248-KIT-S","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM63248-KIT-S\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\n\u003ch3\u003eIncludes:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Fabricated Intake Manifold\u003c\/li\u003e\n\u003cli\u003e2x Quad Throttle Bodies\u003c\/li\u003e\n\u003cli\u003e2x Air filters 9\"x4\" Silver\u003c\/li\u003e\n\u003cli\u003e2x Air Filter Spacer Kit\u003c\/li\u003e\n\u003cli\u003e1x Throttle Body Linkage Kit\u003c\/li\u003e\n\u003cli\u003e2x Mounting Stud Kits\u003c\/li\u003e\n\u003cli\u003e2x Base Gaskets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3mm thick T6061 Sheet Aluminum construction, more durable than competitive intakes\u003c\/li\u003e\n\u003cli\u003eEFI Versions are Available in 92mm and 102mm bore Throttle Body \u003c\/li\u003e\n\u003cli\u003e100% TIG welded\u003c\/li\u003e\n\u003cli\u003eAvailable for EFI and Carbureted applications with custom Holley Sniper logo\u003c\/li\u003e\n\u003cli\u003eCarby or EFI Versions with include 3\/8\" Billet Fuel rail kits \u003c\/li\u003e\n\u003cli\u003eRunner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865595621684,"sku":"PFEM63248-KIT-S","price":3619.92,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM63248-KIT-S_2a7a39ce-3e20-40ff-bf5c-d992ebae8fcb.jpg?v=1774410238"},{"product_id":"proflow-supermax-intake-manifold-tunnel-ram-fabricated-black-dual-carburetted-sb-ford-289-302w","title":"Proflow SuperMax Intake Manifold, Tunnel Ram, Fabricated Black, Dual Carburetted, SB Ford 289-302W - PFEM64242","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM64242\u003c\/p\u003e\n\u003cp\u003eWe have released a range of fabricated aluminium manifolds to suit both small-block Ford and Chevrolet engine platforms. They have dual 4150 bolt pattern flanges welded to them which pair well with our EFI quad throttle bodies or an aftermarket carburetted system. They are powder coated black for a great looking finish.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865595752756,"sku":"PFEM64242","price":1417.5,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM64242.jpg?v=1774410243"},{"product_id":"proflow-supermax-intake-manifold-tunnel-ram-for-holden-commodore-ls7-carburetted-4150-4500-fabricated-black","title":"Proflow SuperMax Intake Manifold, Tunnel Ram, For Holden Commodore LS7, Carburetted 4150, Fabricated Black - PFEM63257","description":"\u003cp\u003e\u003cstrong\u003e\u003cem\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM63257\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS2\/LS3 map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have both 4150 flange bolt pattern for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865596440884,"sku":"PFEM63257","price":913.76,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM63257_99b01fef-0eab-48d0-81ea-0c2c0f572f94.jpg?v=1774410247"},{"product_id":"proflow-supermax-intake-manifold-tunnel-ram-for-sb-chevrolet-fabricated-black-dual-quad-carburetted","title":"Proflow SuperMax Intake Manifold, Tunnel Ram, For SB Chevrolet, Fabricated Black, Dual Quad Carburetted - PFEM64241","description":"All ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM64241\u003cp\u003eWe have released a range of fabricated aluminium manifolds to suit both small-block Ford and Chevrolet engine platforms. They have dual 4150 bolt pattern flanges welded to them which pair well with our EFI quad throttle bodies or an aftermarket carburetted system. They are powder coated black for a great looking finish.\u003c\/p\u003e\r  \u003ch3\u003eFeatures:\u003c\/h3\u003e\r  \u003cul\u003e\r \t\u003cli\u003e3mm  Think T6061 Sheet Aluminum construction, more durable than competitive intakes\u003c\/li\u003e\r \t\u003cli\u003e(2) 4150 style Carburetor flanges\u003c\/li\u003e\r \t\u003cli\u003eTIG welded\u003c\/li\u003e\r \t\u003cli\u003eCarbureted application\u003c\/li\u003e\r \t\u003cli\u003eAvailable for EFI and Carbureted applications \u003c\/li\u003e\r \t\u003cli\u003e175mm Total height\u003c\/li\u003e\r \u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865596932404,"sku":"PFEM64241","price":1349.31,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM64241_78c301ea-af8d-4928-8eee-c5d74454342d.jpg?v=1774410253"},{"product_id":"proflow-supermax-plus-efi-intake-manifold-kit-for-holden-commodore-ls1-ls2-fabricated-black-low-profile-w-fuel-rails-102mm-bore","title":"Proflow SuperMax Plus EFI Intake Manifold Kit, Gen 2, For Holden Commodore LS1\/LS2, Fabricated Black, Low-Profile, w\/Fuel Rails, 102mm Bore - PFEM68000","description":"All ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM68000\u003cp\u003e\u003cstrong\u003eProflow Low Profile SuperMax Plus Intake Manifold Kit LS Engines\u003c\/strong\u003e\u003c\/p\u003e\r  \u003cp\u003eProflow's SuperMax Plus fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\r  \u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\r  \u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have both 4500 and 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\r  \u003cp\u003eSuits a compact length 14mm injector.\u003c\/p\u003e\r  \u003cp\u003eNote: The low profile versions will fit under most bonnets of Holden Commodores from VT-VF.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865597260084,"sku":"PFEM68000","price":1302.61,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM68000_161a4ba7-a30a-42d6-8cf1-57e401ddfdb3.jpg?v=1774410257"},{"product_id":"proflow-supermax-plus-efi-intake-manifold-kit-for-holden-commodore-ls3-l92-fabricated-black-low-profile-w-fuel-rails-102mm-bore","title":"Proflow SuperMax Plus EFI Intake Manifold Kit, Gen 2, For Holden Commodore LS3\/L92, Fabricated Black, Low-Profile, w\/Fuel Rails, 102mm Bore - PFEM68001","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM68001\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProflow Low Profile SuperMax Plus Intake Manifold Kit LS Engines\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eProflow's SuperMax Plus fabricated intake manifolds are cost effective and performance filled! These black powdercoated intake manifolds feature 3mm (1\/8\") thick 6061-T6 sheet aluminum construction with 100% TIG welds for strength and durability. The tapered intake runners are designed to increase air velocity to evenly distribute airflow to all 8 cylinders, improving throttle response and providing consistent volumetric efficiency for your engine. There is also provision for a standard GM LS map sensor to be mounted on the rear of the plenum.\u003c\/p\u003e\n\u003cp\u003eSuperMax LS manifolds are intended for maximum performance applications and will work best with upgraded engine components and hardware, such as upgraded camshafts and cylinder heads.\u003c\/p\u003e\n\u003cp\u003eThe EFI Hi-Ram style versions can be purchased with a 92mm or 102mm throttle body opening and come complete with fuel rail kits ready to go. The Tunnel Ram intakes have both 4500 and 4150 flange bolt patterns for carburettors or throttle bodies. All Proflow LS intake manifolds are avaliable in both LS1\/LS2\/LS6 and LS3\/L92 intake port openings.\u003c\/p\u003e\n\u003cp\u003eSuits a compact length 14mm injector.\u003c\/p\u003e\n\u003cp\u003eNote: The low profile versions will fit under most bonnets of Holden Commodores from VT-VF.\u003c\/p\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865597292852,"sku":"PFEM68001","price":1302.61,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM68001_bc63251c-4d12-4b06-9995-41129fdcd925.jpg?v=1774410262"},{"product_id":"proflow-supermax-sb-chev-efi-intake-manifold-w-fuel-rails-tunnel-ram-fabricated-black-4150-4500-throttle-body","title":"Proflow SuperMax, SB Chev, EFI Intake Manifold w\/ Fuel Rails, Tunnel Ram, Fabricated Black, 4150 Throttle Body - PFEM64245","description":"\u003cp\u003e\u003cem\u003e\u003cstrong\u003eAll ProFlow products have a 4-8 Day wait Time. Ordered via DHL from ProFlow, direct to Pass on the savings on to you.\u003c\/strong\u003e\u003c\/em\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003ePart Number\u003c\/b\u003e: PFEM64245\u003c\/p\u003e\n\u003cp\u003eWe have released a range of fabricated aluminium manifolds to suit both small-block Ford and Chevrolet engine platforms. They have dual 4150 bolt pattern flanges welded to them which pair well with our EFI quad throttle bodies or an aftermarket carburetted system. They are powder coated black for a great looking finish.\u003c\/p\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3mm thick T6061 Sheet Aluminum construction, more durable than competitive intakes\u003c\/li\u003e\n\u003cli\u003eFits 9.02 deck blocks\u003c\/li\u003e\n\u003cli\u003e100% TIG welded\u003c\/li\u003e\n\u003cli\u003eWith Billet Fuel Rails\u003c\/li\u003e\n\u003cli\u003eAvailable for EFI and Carbureted applications \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proflow","offers":[{"title":"Default Title","offer_id":48865597325620,"sku":"PFEM64245","price":1546.66,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0724\/1377\/4132\/files\/PFEM64245_8020acd8-8e1a-4f5b-a59a-5c9fe26df7fb.jpg?v=1774410267"}],"url":"https:\/\/mountperformanceparts.co.nz\/collections\/intake-manifolds.oembed","provider":"Mount Performance Parts","version":"1.0","type":"link"}